Knob & Tube Wiring

Knob & Tube Wiring

Older electrical systems can have many interesting aspects to them. Knob & tube wiring gets its name from the knobs (or insulators) used to keep the wires isolated from objects & the ceramic tubes used to line holes, for example, through wooden floor joists. This type of wiring can be found in homes over 50 years in age unless it has been updated. You may find it with older 60 amp (or less) services.

Some differences with this type of wiring and that used today? -- although the actual wire used may largely be no different from that used today, it consists of only a hot (black) and neutral (white) wire. That is, there is no ground wire. Both wires must run separately to fixtures as opposed to those used now which are contained within one plastic sheathing. In addition, junction boxes for housing electrical connections were seldom, if ever, used.

Although it is a workable system, and safe when installed and used properly, there are some concerns with this system. For example,

(a) there is no ground wire (for more modern lifestyle requirements and safety),

(b) a fear exists that the black and white wires can make contact (a potential fire and safety hazard),

(c) the rubber and cloth insulation around the knob & tube wiring breaks down over time (a potential fire and safety hazard),

(d) it would be too costly to maintain, or even, install this type

Comments

[Derick]

I would like to thank you for writing this article. I own an older home and I didn't understand the potential risks at hand by having wiring that has the potential for fire hazard. I thank you

[Solar Melbourne]

Very encouraging ideas and implementation. I am completely satisfied and agreed to your ideas. Thanks for having it here.

[Timberland Boot Store]

Very, very nicely done!